Warning, Operation instructions, Risk of exposure to dangerous chemicals – North Star MA 1578111D User Manual

Page 9

Advertising
background image

Operation Instructions

9



Applying Chemicals

1.) Install the black nozzle to spray chemicals onto the cleaning surface.
2.) Start the pressure washer according to the start-up instructions.
3.) Submerge the chemical hose in cleaning solution.
4.) Squeeze the spray gun trigger. The chemical injector will draw the chemical into the water stream.
5.) Apply chemicals evenly onto the cleaning surface. Allow the chemicals to react with the dirt, then

clean at high pressure with green nozzle.

6.) Never use more chemical than is necessary to clean the surface.
7.) To clean the chemical injector, draw water through the strainer until all the chemical is purged from

the system.




































Risk of exposure to dangerous chemicals.

Serious injury or death can result if chemical manufacturer instructions are not

followed.

-Wear protective gloves when handling and cleaning with chemicals.
-Understand all safety hazards and first aid for all chemicals being used.
-When cleaning filters, check if chemicals have been used and take any

precautions that are recommended by the chemical manufacturer.

-Different chemicals may interact dangerously with each other, always follow
chemical manufacturer directions before switching chemicals.
-Calculate the correct amount of chemical to mix, dispose of excess chemical

per the manufacturer instructions.

-Never spray flammable liquids.

WARNING

strainer

diluted
chemical

pump inlet

pump outlet

pump

Advertising