Configure wireless parameters for the adapter – NETGEAR HA501 User Manual
Page 8
Configure Wireless Parameters for
the Adapter
Double-click the wireless SysTray icon to activate the wireless adapter configuration utility for
the HA501 Wireless Adapter. The wireless utility program also can show the status of the
adapter card and the signal strength connection to the access point.
13
Icon color
Ad-hoc mode
Infrastructure mode
Red
The wireless adapter has not
Either the wireless adapter is not able
initiated communication
to link to any access point, or the
with any other wireless node
link between the wireless adapter and
the access point is lost.
Yellow
N/A
The link condition between the
wireless adapter and the associated
access point is weak.
Green
The wireless adapter has
The wireless adapter has established
communicated successfully
good communication with an access
with another wireless node.
point and the signal is strong.
12
4
4
HA501 Qcard-Final 1/4/02 8:41 AM Page 15