Napco Security Technologies GEM-DXRP2 - Manual (Page 30)

30
K E Y P AD M E S S AG E S
(With pulsing sounder). Trouble condition on a Day Zone (zone numbers will scroll).
Press
C to silence sounder. Note: Watch Mode must be active.
Alarm Condition, followed by zone number(s). "ALARM" and zones will display after sys-
tem is disarmed. Note zones, then press
C to clear keypad.
(With pulsing sounder). Trouble condition on a FireZone. Press C to silence
sounder. Correct trouble or call for service.
(With pulsing sounder). Alarm condition on a Fire Zone (zone number(s) will scroll).
Press
C to silence sounder. Evacuate premises or correct cause of alarm.
(When Zones Bypassed ("Dsp Bypass") displayed) indicates zone(s) that have been de-
activated, where XX represents the zone number(s).
(OPTIONAL) (For partitioned systems only). Code not valid for area.
(For Commercial Systems Only). Code not valid for programmed time window.
Wrong code entered or "Easy Bypass" function not enabled.
(OPTIONAL) (In Manager's Mode). Arming prevented due to unsecured zone. "#" represents
number of area with unsecured zone. Press area number, then
G and
D
to switch to
that area with faulted zones(s) displayed. The faulted zone can now be secured or bypassed,
and
A C O N
DAY ZN
A C O N
ALARM
T R O U B L E
A C O N
FireTb
E41-XX
r e s e t F I R E A L A R M
A C O N
FIRE
B Y P A S S E D
A C O N
ZONEXX
A C O N
WRONG/
AREA
A C O N
WRONG/
TIME
A C O N
WRONG/
CODE
CAN'T/ARM/
TROUBLE/AREA #