NISSAN 2010 GT-R - Manual (Page 15)

MAINTENANCE ITEMS
You can set up to four different maintenance interval items. To display the setting of the
maintenance interval, select one of the four “Reminder” keys using the center dial and press
the ENTER button. To set the maintenance interval, select the “Interval” key using the center
dial and press the ENTER button. Use the center dial to change the interval; press the BACK
button to accept the changes. To reset the maintenance interval, select the “Reset Distance”
key using the center dial and press the ENTER button.
DISPLAY SCREEN SETTINGS
The SETTINGS screen will appear when the SETTING button is pressed. Select the
“Display” key using the center dial and press the ENTER button to choose from various
display screen options. The “Display” key will allow you to adjust the information shown on
the display screen, such as brightness or contrast.
CLOCK SET/ADJUSTMENT
Press the SETTING button, then select the
“Clock” key using the center dial and press
the ENTER button to access the following
clock settings:
Ⅲ On-screen Clock – When this item is
turned to ON, a clock is always dis-
played in the upper right corner of the
screen. The clock is automatically ad-
justed by the GPS system.
Ⅲ Clock Format – Choose either the 12-
hour clock display or the 24-hour clock
display.
Ⅲ Offset Adjust – Adjust the time by increasing or decreasing per minute.
Ⅲ Daylight Saving Time – Turn this item to ON for daylight savings time application.
Ⅲ Time Zone – Choose the time zone.
VEHICLE INFORMATION DISPLAY
Use the selecting switch and determining switch to display the
following modes on the screen:
Ⅲ Warning messages (if there are any)
Ⅲ MPG (instant fuel economy)
Ⅲ MPG/MPH (average fuel economy and speed)
Ⅲ Time/Miles (elapsed time since last reset)
Ⅲ Range (average distance to empty)
Ⅲ Outside temperature
13