NISSAN 2010 GT-R - Manual (Page 17)

TRANSMISSION, SUSPENSION AND VDC SET-UP SWITCHES
The control of the vehicle’s dual-clutch transmission , suspension , and Vehicle
Dynamic Control (VDC) can be changed by operating each set-up switch.
TRANSMISSION SET-UP SWITCH (Automatic Mode)
Ⅲ When the shift selector is in A (Automatic) and the set-up switch is set to Normal
mode (center position), the appropriate gear position is automatically selected for
optimal fuel mileage.
Ⅲ Push the switch up to the R position for higher RPM operation, and greater
powertrain torque and engine braking.
Ⅲ Push the switch
down to the SNOW position to reduce the powertrain torque on
snowy roads and slippery surfaces.
TRANSMISSION SET-UP SWITCH (Manual Mode)
Ⅲ When driving in manual shift mode with the set-up switch
set to Normal mode
(center position), the engine automatically upshifts when the tachometer reading
reaches the red zone to limit engine revving.
Ⅲ Push the switch
up to the R position to change gears more quickly than in normal
mode.
Ⅲ When the switch is in the R position, the engine will not automatically upshift when RPM
reaches the red zone.
Ⅲ The SNOW position is not available when driving in manual shifting mode.
SUSPENSION SET-UP SWITCH
Ⅲ When the set-up switch
is set to Normal mode (center position), the damping
force of the shock absorbers is automatically adjusted to be suitable for everyday
driving.
Ⅲ Push the set-up switch
up to the R position to increase suspension stiffness rates
for cornering during cruise driving.
15