Eizo FORIS FS2331 - Manual (Page 16)

16
Chapter2AdjustingScreens
●
To perform advanced adjustments
The “Color” menu of the Setting menu allows you to set and save the independent color adjustment for each
mode.
Attention
• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more
after turning the monitor power on before starting adjustment.
• Perform the range adjustment first when adjusting color for analog signals (see “To adjust color gradation
automatically “Auto Range Adjust”” (page 25) ).
• The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics.
Make fine color adjustment visually when matching colors on multiple monitors.
Note
• The value shown in “K” is available only as reference.
• Using the “ScreenManager Pro for LCD (DDC/CI)” allows you to perform the color adjustment by using the mouse
and keyboard of your PC. (Refer to “Chapter 4 Color Adjustment” in the User’s Manual for “ScreenManager Pro for
LCD (DDC/CI)”.)
●
Adjustable settings in each mode
The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.)
For instructions on how to adjust or set each function, refer to subsequent pages.
√: Adjustable -: Not adjustable
Function
Color Mode
User1
User2
sRGB Paper Game Cinema
Brightness √ √ √ √ √
BlackLevel √ - - √ √
Contrast √ - - √ √
Saturation √ - - √ √
Hue √ - - √ √
Temperature √ - √ √ √
AdvancedSettings ContrastEnhancer √ - - √ √
PowerResolution √ - - √ √
Gamma √ - - √ -
Gain √ - - - -
Overdrive √ - - √ -
ColorReset √ √ √ √ √