Eizo FORIS FS2331 - Manual (Page 33)

33
Chapter4PowerSavingFunctions
Attention
• When all the conditions below are met, the monitor does not change to the power saving mode even if “Power Save”
is set to “Enable”:
- “Power Save” for Sound is set to “Sound On” (
“Audio Output” (page 33) )
- In the mute state ( “To mute the sound temporarily” (page 28) )
In these cases, reset the mute.
Exiting the power saving mode
If the monitor receives input, it automatically exits the power saving mode and returns to the normal display
mode.
●
Audio Output
This monitor allows you to turn off the audio output from the speakers/headphone at the power saving mode.
Procedure
1. Choose “Sound” in the Setting menu, and press
.
2. Choose “Power Save” in the “Sound” menu, and press .
The “Power Save” menu appears.
3. Select “Sound On” or “Sound Off” with or .
4. Press to exit the adjustment.
Attention
• No audio is output while the monitor is in the Power Saving mode, if the HDMI signal is input or the sound source is
of HDMI.
4-2. Setting Power Indicator “Power Indicator”
This function allows you to set the power indicator (blue) ON/OFF in the monitor ON condition.
Procedure
1. Choose “Monitor Settings” in the Setting menu, and press
.
2. Choose “Power Indicator” in the “Monitor Settings” menu, and press .
The “Power Indicator” menu appears.
3. Select “Enable” or “Disable” with or .
4. Press to exit the adjustment.