NordicTrack C2270 NTL12950 - Manual (Page 27)

27
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been used and the total number of miles that the walk-
ing belt has moved. The information mode also allows
you to select miles or kilometers as the unit of mea-
surement for the console, to turn on and turn off the
demo mode, and to reset all programs to the original
settings.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown in the display:
The Time zone of
the display will
show the total
number of hours
that the treadmill
has been used.
The Odometer
zone will show
the total number
of miles (or kilometers) that the walking belt has moved.
An “E” for English miles or an “M” for metric kilometers
will appear in the Pace/Speed zone. Press the Speed
increase button to change the unit of measurement if
desired.
IMPORTANT: If a “d” appears in the Heart Rate/
Calories zone of the display, the console is in the
“demo” mode. This mode is intended to be used only
when a treadmill is displayed in a store. When the con-
sole is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the indicators in the display will automatically light
in a preset sequence, although the buttons on the con-
sole will not operate.
If a “d” appears when the infor-
mation mode is selected, press the Speed decrease
button so the “d” disappears.
To reset all programs to the
original settings, first press
the Start button. The word
“SAVE” will flash in the
Pace/Speed zone of the dis-
play. To reset all programs,
press the Save button. If you do not wish to reset all
programs, press the Stop button.
To exit the information mode, remove the key from the
console.
HOW TO ADJUST THE CUSHIONING SYSTEM
The treadmill features a cushioning system that re-
duces the impact as you walk or run on the treadmill.
To increase the firmness of the walking platform, slide
the cushion handles (only the right cushion handle is
shown) toward the rear of the treadmill. To decrease
the firmness, slide the cushion handles toward the
front of the treadmill.
Note: Make sure both handles
are set at the same firmness level. The faster you
run on the treadmill, or the more you weigh, the
firmer the walking platform should be.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor offers hands-free oper-
ation and allows you to use the console’s heart rate
programs.
To purchase the optional chest pulse
sensor, call toll-free 1-888-825-2588.
Miles
Hours
Cushion Handle
Increase
Decrease