Introduction – NAD CI9060 User Manual

Page 3

Advertising
background image

3

Introduction

TABLE OF CONTENTS

I Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5

Note to Installation personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

II Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-10

NAD ATO Logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
NAD OMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
NAD Protection Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rear panel connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front panel connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

III Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-16

Rack Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Shelf Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Speaker Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Client Configuration (Flex-Pad) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Client Configuration (input/channel destination) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

IV Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
V Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
VI Fuse Replacement Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

ATTENTION: INSTALLATION PERSONNEL

The mounting hardware was specifically engineered for the NAD CI-series amplifier. We recommend that
you do not substitute the mounting hardware.

Due to the high-power capability of the NAD CI-series amplifier, the power supplies are heavy and may
require more than one installation person to rack-mount the amplifier.

NOTE

The amplifier’s weight must always rest on its bottom feet when placed on to a surface. Never put the
amplifier down on its rear panel, with its front panel facing up. Doing so risks damage to the
input/output connectors.

The amplifier generates a moderate amount of heat, requiring internal ventilation. Do not permit the air
inlet and outlet grilles on the top, bottom, side, and back cover to be obstructed by papers or other
materials.

NOTE

To prevent a fire or shock hazard, do not permit liquid or moisture to enter the amplifier. If liquid is
accidentally spilled on it, immediately shut off the power and unplug the AC Mains cable from the wall
outlet.

Do not open the amplifier or attempt to modify or repair it yourself. Refer all servicing to a qualified
technician.

ENGLISH

FRANÇAIS

DEUTSCH

NEDERLANDS

ESP

AÑOL

IT

ALIANO

POR

TUGUÊS

SVENSKA

Specifications or design subject to change without notice.
All specifications are those in effect at time of printing.

NAD®, OMC™, ATO Logic™, and Flex-Pad™ are trademarks of NAD Electronics International, a division
of Lenbrook Industries Limited.

©2000 NAD Electronics International, a division of Lenbrook Industries Limited

CI9120_9060 manual (GB) 12/12/02 9:09 pm Page 3

Advertising