Installing the car mount, Assembling the cradle, Securing the cradle – Navigon 7200T User Manual
Page 29: Placing the navigation device in the cradle
Advertising
Getting Started
Installing the Car Mount
October 2008
NAVIGON 7200T User’s Guide
11
NAVIGON, INC.
Installing the Car Mount
Assembling the Cradle
•
Assemble the cradle as shown below. (No tools are required.)
Securing the Cradle
Clean and dry the mounting surface and the suction cup on the base of the mount.
These areas must be dry and free of dirt and grease.
1. Open the lever on the suction cup as far a possible.
2. Place the cradle suction cup against the mounting surface.
3. Press the suction cup lever down towards the mounting surface.
Placing the Navigation Device in the cradle
On the back of the NAVIGON 7200T there is a circle with two recesses.
Advertising