New Balance 5K 5100 - Manual (Page 7)

STEP 1 – Foot Tube Assembly
a) Align the Rear Foot Tube with
Levelers with the rear of the Main
Frame Assembly. Make sure the
square holes in the Rear Foot Tube
are on the outside. Insert Carriage
Bolts from fastener pack through
the Rear Foot Tube with Levelers
and Main Frame Assembly. Secure
with Curved Washers and Nuts also
from the fastener pack. Tighten
with the Wrench provided.
b) Repeat on the front of the unit
using the Front Foot Tube with
Wheels. Make sure wheels are
facing forward (away from the unit)
during assembly.
STEP 2 – Computer Tube Assembly
a) Attach the Wire Connector from the Main
Frame Assembly to the Wire Connector
coming out the bottom of the Computer
Tube. Computer Tube should angle down
towards the front of the unit as shown.
b) Insert the Computer Tube into the front
of the Main Frame Assembly tucking the
wires down into the Main Frame Assembly.
Be careful not to pinch the wires. Gently
pull the wires up from the top of the
Computer Tube to prevent any slack in
the wires at the base of the Computer
Tube.
c) Secure the Computer Tube in place
with the four allen bolts and washers
from the fastener pack. Tighten with
the Allen Wrench provided.
1a
1b
main frame
assembly
carriage bolt
rear
foot
tube
leveler
acorn nut
washer
front
foot
tube
carriage bolt
computer
tube
main frame
assembly
allen bolt
washer
wire
connector
wheel
6