New Balance 5K 5100 - Manual (Page 9)

STEP 7 – Foot Pedal Assembly
The Foot Pedals and the Foot Pedal Cranks are
marked “L” and “R”.
Using the Wrench provided, attach the Left Foot
Pedal to the Left Crank rotating the Wrench
counter-clockwise. Do not try to turn clockwise.
You will strip the threads.
Attach the Right Foot Pedal to the Right Crank
rotating the Wrench clockwise.
left side shown
looking from the
back of the unit
left
crank
“L” & “R”
markings are
shown on the
ends of the
pedal shafts
left
foot pedal
STEP 6 – Computer Assembly
a) Remove the four Phillips Bolts from the back
of the Computer.
b) Snap together Wire Connectors for Computer,
tucking the Wires inside the Computer Tube.
Be careful not to pinch the wires.
c) Attach the Computer using the four Phillips
Bolts you removed in step (a). Tighten with
the Phillips Screwdriver provided.
d) Remove Battery Door on the back of
the Computer.
Insert four “C” Batteries (included) in
numbered order and replace Battery Door.
e) Plug the Wire from the Handlebar Pulse
Sensors into the back of the Computer.
computer
phillips bolts
computer
tube
right foot
pedal
left foot
pedal
crank
handlebar
pulse sensors
wire
wire
connectors
8
STEP 8 – AC Adapter
Insert AC Adapter into
front of Unit, then plug
into wall.
Assembly is now complete.
IMPORTANT:
Please read pages 10-11
before beginning your workout
for important instructions
on how to use your
New Balance 5100 Upright Bike.