Nikon SD-9 - Manual (Page 21)

20
En
*1: Interval until SD-9’s ready-light comes on when firing the Speedlight at full output once
every 30 seconds (120 seconds with lithium batteries).
*2: Times the SD-9’s ready-light comes on within 30 seconds when firing the Speedlight at full
output once every 30 seconds (120 seconds with lithium batteries).
Use the same type of batteries with both the SD-9 and the SB-900. •
With fresh batteries at normal temperatures (20 °C/68 °F). The performance may vary •
depending on the battery’s freshness or change of battery specifications.
When the ready-lights are off (or the SD-9 is not connected to the SB-900), the SD-9 uses
•
very little battery power, reducing the need to change batteries frequently. Batteries should
be removed when the unit is put away in storage or not used for long periods.
Dimensions (W
× H × D): Approx. 180.5 Ч 73 Ч 23.0 mm (7.1 Ч 2.9 Ч 0.9 in.)
(Body only)
Weight: Approx. 205 g (7.2 oz.) (without batteries)
Specifications and design are subject to change without notice. •
Oxyride battery is a registered trademark of Matsushita Electric Industrial Co., Ltd. •
Other products and brand names are trademarks or registered trademarks •
Major specifications in combination with the SB-900
■
Batteries
Min. recycling
time (approx.) *1
Min. number of fl ashes *2 /
recycling time *1
AA-type Alkaline-manganese
× 4 1.9 sec.
280/1.9 – 30 sec.
AA-type Lithium
× 4
2.4 sec. 500/2.4 – 120 sec.
AA-type oxyride
× 4
1.4 sec. 280/1.4 – 30 sec.
AA-type Ni-MH (eneloop)
× 4
1.2 sec. 350/1.2 – 30 sec.
AA-type Alkaline-manganese
× 8 1.2 sec.
450/1.2 – 30 sec.
AA-type Lithium
× 8
1.6 sec. 840/1.6 – 120 sec.
AA-type oxyride
× 8
1.0 sec. 450/1.0 – 30 sec.
AA-type Ni-MH (eneloop)
× 8
0.8 sec. 520/0.8 – 30 sec.
Specifications