Numark Industries DXM09 User Manual

Page 2

Advertising
background image

2

MIXER QUICK SETUP GUIDE (ENGLISH)

Make sure all items listed on the front of this guide are included in the box.

1.

READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT

2.

Study this setup diagram.

3.

Place mixer in an appropriate position for operation.

4.

Make sure all devices are turned off and all faders are at “zero”

5.

Connect all stereo input sources as indicated in the diagram.

6.

Connect the stereo outputs to the power amplifier(s), tape decks, and/or audio

sources.

7.

Plug your mixer and other devices into AC power.

8.

Switch everything on in the following order.

audio input sources (i.e. turntables or CD players)

your mixer

last, any amplifiers

9.

When turning off, always reverse this operation by,

turning off amplifiers

your mixer

last, any input devices

10. Go to

http://www.numark.com

for product registration.

OR

HOUSE/CLUB AMP

CD BURNER

BOOTH AMP

FROM

FADER

START

TO MIC

TO LINE

TO LINE

TO FADER

START

TO AMP

TO AMP

TO PHONO

Advertising