Nlynx MinIT6000 - Manual (Page 31)

7. Click Server to connect to a server or Published Application to connect to a
published application. You can click Refresh button to refresh the Citrix server on
the network, then select the server which you want to connect to.
If your CE device is not on the same network as the Citrix server which you would
like to connect to, the server name will not appear in the list (this would occur if you
are on the other side of a router, across the Internet, or using RAS to connect to a
remote network containing Citrix servers). In this case, click Server Location and go
to the next step. Otherwise, scroll through the list and select the Citrix server or
published application or type the name of the Citrix server or published application in
the edit field. Click Next.
8. The Server Location dialog box appears:
Remote Application Manager uses the information entered in the Server Location screen
to help locate available Citrix servers and published applications.
If:
• you are on another network (for example, if you are on the other side of a
router, across the Internet, or connected by RAS), click Add to enter the
IP address or DNS name of a Citrix server on the network that contains the
Citrix server you would like to connect to. The Windows CE client uses
this server to locate the list of available Citrix servers on the network.
• your network configuration cannot propagate UDP traffic (for example, if
your firewall restricts UDP broadcasts), please select TCP + HTTP
browser or SSL/TLS + HTTPS browser. Make sure that the list contains
the IP address or name of a Citrix server on the network that contains the
Citrix server you would like to connect to. The Windows CE client uses
this server to locate the list of available Citrix servers on the network.
Note: When you first select TCP + HTTP browser, the convention used for the default
server name is ica.domainname where domainname is your TCP/IP domain name. You
can change this to a specific server name/IP address or leave the default setting and map
the name of a server to ica.domainname. Note that TCP/IP+HTTP server location uses a
TCP connection so does not support the (Auto-Locate) function.
Click OK and then click Next.