Nuvo NV-E6DMS-DC - Manual (Page 22)

21
Specifications
Zones 1-6 Power Amplifier Outputs Zone Trigger Outputs
Continuous Average Output Power 40W (20W x 2) Output Power 12V @ 50mA
Two channels driven 30-20kHz @1% THD Outputs 6 (zones 1-6)
Rated Distortion (1/2 power) 0.40%
Rated Impedance 6 Ohms Power Requirements
Damping Factor 50+ Power Supply 120VAC/240VAC 50/60Hz
Frequency Response (20-20kHz) ±2 dB Power Consumption all channels 340VA (290W)
driven to full-rated power
Zones 1-6 Preamplifier Outputs Cower Consumption average 50VA (40W)
Variable output 0-600mV operating conditions
Fixed output 600mV Power Consumption no signal 30VA (12.5W)
Impedance 600 Ohms USA Safety Listing (UL 6500)
Canada Safety Listing (CAN/CSA E60065.00)
Source Inputs 1-6 CE Listing/SEMKO (EN60065, EN55013,
input Impedance 10K EN55020, EN6100-3-2, EN6100-3-3/A1)
Input Sensitivity for rated power 300mV RMS
Input Overload 3V RMS Physical Specifications
Unit Size Millimeters
88 H x 430 W x 325 D
Emitter Outputs Unit Size Inches 3 1/2 H x 17 W x 12 3/4 D
Source Outputs 6 Shipping Size Millimeters 290 x 540 x 440
Sum Outputs 2 Shipping Size Inches 11 3/8 x 21 1/4 x 17 3/8
Output Drive Current 100mA Unit Weight Kilograms 7.8
Output Drive Voltage 12V Unit Weight Pounds 17.0
Compatible with single and dual emitters Shipping Weight Kilograms 12.7
Shipping Weight Pounds 28.0
System Keypad Size Millimeters 107.2 H x 41.5 W x 32.5 D
System On 12V @ 50mA Keypad Size Inches 4 1/4 H x 1 5/8 W x 1 1/4 D
External Mute 3-12V DC
NuVo reserves the right to change specifications
without notice.