Navigon 72xx User Manual

Page 12

Advertising
background image

User’s manual NAVIGON 72xx

- 12 -

Before you begin

Inserting the navigation device into the cradle

On the back of the NAVIGON 72xx you will see a circle with two
recesses.
1. Hang the navigation device by the upper recess on the upper lug of

the cradle. (See illustration)

2. Then press it towards the cradle so that it latches in place.

Supplying power to the navigation device

Included in delivery of the NAVIGON 72xx is a car charger cable with
which power can be supplied to the navigation device via the vehicle's
cigarette lighter.

Connect the car charger cable to the vehicle's cigarette lighter and
to the mini USB socket of the navigation device.

Note: Plug the USB connector into the navigation device swiftly as far it
will go! (Refer to "Troubleshooting" on page 63.)

Caution! Connect the car charger cable only to cigarette lighters with
an operating voltage of 10-24V.

The LED on the bottom of the navigation device lights up orange during
charging.
As soon as the battery is fully charged, the LED lights up green.

Note: It takes approx. 4-5 hours to charge the device when the battery
is flat.
A fully charged battery enables 3 hours of use.

Removing the navigation device from the cradle

On the bottom of the plate in which you hung the navigation device is a
clip.

Advertising