Nikon D300 User Manual
Page 379
353
n
A
The AF-S/AF-I Teleconverter
The AF-S/AF-I teleconverter can be used with the following AF-S and AF-I
lenses:
• AF-S VR Micro 105mm f/2.8G ED
1
• AF-S VR 200mm f/2G ED
• AF-S VR 300mm f/2.8G ED
• AF-S 300mm f/2.8D ED II
• AF-S 300mm f/2.8D ED
• AF-I 300mm f/2.8D ED
• AF-S 300mm f/4D ED
2
• AF-S 400mm f/2.8D ED II
• AF-S 400mm f/2.8D ED
• AF-I 400mm f/2.8D ED
• AF-S 500mm f/4D ED II
2
• AF-S 500mm f/4D ED
2
• AF-I 500mm f/4D ED
2
• AF-S 600mm f/4D ED II
2
• AF-S 600mm f/4D ED
2
• AF-I 600mm f/4D ED
2
• AF-S VR 70–200mm f/2.8G ED
• AF-S 80–200mm f/2.8D ED
• AF-S VR 200–400mm f/4G ED
2
• AF-S NIKKOR 400mm f/2.8G ED VR
• AF-S NIKKOR 500mm f/4G ED VR
2
• AF-S NIKKOR 600mm f/4G ED VR
2
1 Autofocus not supported.
2 Autofocus not supported when used with AF-S Teleconverter TC-17E II/TC-20E II.
A
Compatible Non-CPU Lenses
If lens data are specified using [Non-CPU lens data] (pg. 196), many of the
features available with CPU lenses can also be used with non-CPU lenses.
If lens data are not specified, color matrix metering can not be used, and
center-weighted metering is used when matrix metering is selected.
Non-CPU lenses can only be used in exposure modes
g and h, when
aperture must be set using the lens aperture ring. If the maximum
aperture has not been specified using [Non-CPU lens data], the camera
aperture display will show the number of stops from maximum aperture;
the actual aperture value must be read off the lens aperture ring.
Aperture-priority auto will be selected automatically in exposure modes
e
and
f. The exposure-mode indicator (e or f ) in the control panel will
blink, and
g will be displayed in the viewfinder.