Entry/exit function -31 system operation -31 – NISSAN 2010 Maxima User Manual

Page 160

Advertising
background image

The driver’s seat, steering column, and outside
mirrors will move to the memorized position with
the indicator light blinking, and then the light will
stay on for approximately 5 seconds.

ENTRY/EXIT FUNCTION

This system is designed so that the driver’s seat
and automatic operation steering column will au-
tomatically move when the shift selector is in the
P (Park) position. This allows the driver to get into
and out of the driver’s seat more easily.

The driver’s seat will slide backward and the
steering wheel will move up when the driver’s
door is opened and the ignition switch is in the
LOCK position.

The driver’s seat and steering wheel will return to
the previous position when the driver’s door is
closed and the ignition switch is pushed.

The entry/exit function can be adjusted or can-
celed. See “Comfort & Convenience settings” in
the “Monitor, climate, audio, phone and voice
recognition systems” section of this manual.

Restarting the entry/exit function

If the battery cable is disconnected or if the fuse
opens, the entry/exit function will be disabled.
Drive the vehicle over 25 MPH (40 km/h) to

restart the entry/exit function. You can also restart
the entry/exit function using the following proce-
dure.

1. Connect the battery cable or replace the

fuse.

2. Open and close the driver’s door more than

2 times with the ignition switch in the LOCK
position.

The entry/exit function should now work properly.

SYSTEM OPERATION

The automatic drive positioner system will not
work or will stop operating under the following
conditions:

● When the vehicle speed is above 4 MPH (7

km/h).

● When any of the memory switches are

pushed while the automatic drive positioner
is operating.

● When the adjusting switch for the driver’s

seat is turned on while the automatic drive
positioner is operating.

● When the seat has been already moved to

the memorized position.

● When no seat position is stored in the

memory switch.

● When the shift selector is moved from P

(Park) to any other position.

● When the driver’s door remains open more

than 45 seconds and the ignition switch is
not in the ON position.

The automatic drive positioner system can be
adjusted and canceled for vehicles with naviga-
tion system. See “Comfort & Convenience set-
tings” in the “Monitor, climate, audio, phone and
voice recognition systems” section of this
manual.

Pre-driving checks and adjustments

3-31

Advertising