Nortel Networks i2050 - Manual (Page 45)

Supervisor features
45
Supervisor features
This section describes the following features that are available to
supervisors:
• “Using Answer Agent” on page 45
• “Using Agent key” on page 46
• “Using Answer Emergency” on page 46
• “Using Call Agent” on page 47
• “Using Interflow” on page 47
• “Using Night Service” on page 47
• “Using Observe” on page 48
• “Using Display Agent Status” on page 49
• “Using Display Queue” on page 50
Using Answer Agent
Use Answer Agent to receive calls from agents in a non-emergency
situation. Your status changes to NotReady and the indicator remains lit
as long as the call is active.
To use the Answer Agent feature, do the following:
1. When the indicator next to the Answer Agent key flashes, click
Answer Agent
.
The Agent ID of the person contacing you display on your telephone.
2. To end the call, click Goodbye .
Note: The LCD remains lit as long as you are on the call, and your
status is displayed as NotReady. If configured, your status is
displayed as Not Ready in Contact Center Manager Administration
Real Time Display.