NETGEAR POE101 - Manual (Page 3)

Package contents
• Power over Ethernet base unit
• Power over Ethernet terminal unit
• Localized AC power cable
• 100~240 V AC to 24V DC 30W power adapter
• Two 2-foot DC power cables
• 2-foot Ethernet cable
• Wall mount kit
• Installation Guide
• Warranty and support information cards
Setup Requirements
• Two straight through Category 5 Ethernet cables:
• a short cable from an Ethernet hub or switch to the POE101 base unit and
• a second cable (up to 328 feet) for connecting from base unit to a terminal unit.
These cables are not included in the NETGEAR POE101 packaging.
• A 5V DC powered NETGEAR access point 2 .
POE101 installation guide,
support information card &
warranty/registration card
Category 5
100 Mbps
Ethernet cable
110v cord
Power adapter
DC Power cables
POE101Base unit POE101 Terminal unit
Wall mount kit
1
1
2 One set of POE101 adapters per access point is required.