NEC EXPRESS 320Lb-R - Manual (Page 185)

Installing and Using Utilities 5-59
13. Power off and on the main unit to reboot the system.
After one reboot, the main menu will appear on the management PC’s screen, on which you
can perform hardware setup and run utilities.
TIPS: If the configuration information (CSL_LESS.CFG) in the FD has already been
loaded, the main menu will appear without a reboot.
14. When the main menu appears on the management PC’s screen, eject the floppy disk.
15. If you use other tools, exit NEC EXPRESSBUILDER and power off/on the main unit.
IMPORTANT: After completing the procedure for remote console connection,
uncheck [Reset] of [Activate] in [Property] dialog box.