NEC EXPRESS 320Lb-R - Manual (Page 219)

Troubleshooting 7-19
On-screen error message Cause Action
8610 MAC Address update
failed – CoreI/O#0
10/100Mbit Ethernet
Controller
FRB2 timeout occurred when
setting MAC address, and
rewrite was unsuccessful. • Replace the back panel
board.
• Replace the PCI module
board 1.
8611 MAC Address update
failed – CoreI/O#0 Gbit
Ethernet Controller
FRB2 timeout occurred when
setting MAC address, and
rewrite was unsuccessful. • Replace the back panel
board.
• Replace the PCI module
board 1.
8612 MAC Address update
failed – CoreI/O#1
10/100 Mbit Ethernet
Controller
FRB2 timeout occurred when
setting MAC address, and
rewrite was unsuccessful. • Replace the back panel
board.
• Replace the PCI module
board 2.
8613 MAC Address update
failed – CoreI/O#1 Gbit
Ethernet Controller
FRB2 timeout occurred when
setting MAC address, and
rewrite was unsuccessful. • Replace the back panel
board.
• Replace the PCI module
board 2.