Network Computing Devices WUSB11 - Manual (Page 8)

Wireless USB Network Adapter
9
Instant Wireless ® Series
8
6. After the software has been successfully installed, the screen in Figure 4-6
will appear. Click the Exit button.
Proceed to “Chapter 5: Hardware Installation.”
Figure 4-6
4. If you chose Infrastructure Mode, go to Step 5 now. If you chose Ad-Hoc
Mode, select the correct operating channel for your network. The channel
you choose should match the channel set on the other devices in your wire-
less network. Then click the Next button.
5. The Setup Wizard will ask you to review your settings before it starts to copy
files. Click the Next button to save these settings, or click the Back button
to change any settings.
Figure 4-4
Figure 4-5