Nikon NP64 User Manual

Page 50

Advertising
background image

41

5. Using the Viewer (NP64/NP54)

Projecting images stored in a USB memory device (Basic operation)

This section explains the basic operation of the Viewer.
The explanation provides the operational procedure when the Viewer [OPTIONS] menu (

→ page

45

) is set to the

factory default.

- Starting the Viewer ......................................................................below
- Removing the USB memory from the projector ...................... page

42

- Exiting the Viewer .................................................................... page

43

Preparation: Before starting the Viewer, store images to the USB memory using your computer.

Starting the Viewer

1. Turn on the projector. (

page

16

)

2. Insert the USB memory into the USB port of the pro-

jector.

- To remove the USB memory from the projector, select

“REMOVE USB DEVICE” from the OPTIONS menu. (

Step 5 on page

43

)

3. Press the

(SOURCE) button.

The SOURCE list will be displayed.
• Another way to display the SOURCE list is to press the

VIEWER button on the remote control. Go on to Step [5].

4. Press the

(SOURCE) three times to select the cur-

sor to [VIEWER].

Each time the

button is pressed quickly, the next

source will be highlighted.

• During this time, do not press and hold the

button for

2 seconds or longer. Doing so will start the projector to
detect the signal automatically.

Highlighting [VIEWER] for a while will start the Viewer to

project images stored in the USB memory (slide screen).

Advertising