NISSAN 2011 Pathfinder - Manual (Page 72)

INFO:
By selecting [Sort], you can sort the list in
the original order.
3. The selected destination is displayed at the
center of the map. Highlight [Start] after
confirming the location of the displayed
destination, and push <ENTER>. The
system sets the destination to the selected
location and starts calculating a route.
INFO:
Even after setting a destination, you can adjust
the location of the destination, store the route,
etc.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-24)
Narrowing down with By Name:
1. Highlight [By Name] and push <ENTER>. A
character input screen is displayed.
2. Enter the name of the destination facility.
3. After finishing the entry, highlight [OK] and
push <ENTER>. A list screen is displayed.
4. Highlight the preferred destination facility
from the list and push <ENTER>.
INFO:
. By selecting [By Dist.], you can sort the
list by the nearest distance. The position
of the selected location is displayed in
the preview on the right side of the
screen.
. In some cases, when a POI name has
been entered, the number of matching
4-8 Setting a destination