Nokia 150T - Manual (Page 25)

GB 25
NAVI BARS
Settings folder ☛ Access
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory.
The following settings can be altered from this menu.
Access Control
Select “Yes” or “No” to turn the access control in all menus on or off. NOTE: Even
when “No” is selected, the access code still has to be entered before you can
watch locked channels.
Receiver lock
If you select “Yes”, you will have to enter the access code every time you start the
Mediamaster from standby.
Age rating control
If you want everybody to have access to all available types of programmes, select
“No”.
If you select “Yes”, you may block programmes unsuitable for children.
Age Limit
Select an age limit between 3 and 18 on the line that appears.
However, you should be aware that not all Service Providers have the necessary
codes for these functions implemented in their transmissions.
Change access code
This is used to change the access code from the default, factory-set 1234. This code
is used to access any Mediamaster function that requires it, e.g. access code. If
you forget the access code that you have set, contact and Nokia Authorised Serv-
ice Centre for assistance.
Settings folder ☛ Time
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory.
Select
cursor up/down to adjust the time in half-hour increments; to adjust the
minutes, select cursor left/right .