Nokia 150T - Manual (Page 29)

GB 29
VIEWING MODE
Teletext
Pressing txt will open a teletext page, if teletext is transmitted. Select teletext
pages with the numeric buttons on the remote control (Fig. 1).
You can also quickly go to the different page alternatives shown in any page by
pressing
cursor left/right .
• Press
select on a highlighted page number to go to that page.
• By pressing “ 0” you can alter between the last two pages you just have watched.
• Press info to hide everything else on a teletext page besides its headline (Fig.
2).
• Sometimes a teletext page may contain subpages. When subpages are avail-
able, they are numbered in the lower part of the screen (Fig. 3). To view a
subpage, press
select when no page number is highlighted. Go to the different
subpages using
cursor left /right . Note: it might take some time before all
subpages ara available for selection.
• Press
txt/back to return to TV/radio mode.
Cursor up /down will show the next or previous teletext page.
On most new TV sets, you can use the TV’s remote control to open and control
the teletext functions while watching digital TV channels. This function is called VBI
insertion.
TV Release (0)
With the 0 button, you can toggle between externally connected equipment, such
as a digital terrestrial TV or a video recorder, which must be switched on.)
(This is only valid when the units are connected via SCART cables, and not by RF
connection.)
Figure 1
Figure 2
Figure 3. Subpage numbers