Nvidia Quadro FX 5500 - Manual (Page 23)

NVIDIA Corporation
Quadro FX 4500/5500 SDI User’s Guide – Version 2.0 19
C HAPTER 3
Windows–Using the Graphics to SDI Control Panel
Advanced Adjustments
This section describes the following additional settings that you can control using the
Graphics to SDI page:
• “Adjusting the Desktop Area” on page 19
• “Applying Gamma Correction” on page 21
Adjusting the Desktop Area
By default, the entire desktop is converted to SDI output. If the desktop is smaller than the
size of the SDI output, it will be scaled to fit. If the desktop is larger than the SDI output, it
will be cropped to fit.
Instead of using the entire desktop, you can specify a region of the desktop to convert to
SDI output as follows:
1 In the Desktop group box, click Change Desktop region.
The display property page minimizes and the SDI Output dialog box appears.
Superimposed over the desktop is a rectangular outline that shows the region that will
be used for SDI output.
Figure 3.3 Desktop Region Adjustment