Detecting the external sync signal source – Nvidia Quadro FX 5500 User Manual
Page 28
NVIDIA Corporation
24
Quadro FX 4500/5500 SDI User’s Guide– Version 2.0
C
HAPTER
3
Windows–Using the Graphics to SDI Control Panel
Detecting the External Sync Signal Source
The software should automatically detect the external sync signal. When it does, the sync
format information appears in the Genlock/Framelock format text box.
If you have both SDI and Composite signals connected -
•
The software automatically chooses the SDI signal.
•
If you want to switch to the composite signal, click the arrow in the Genlock/
Framelock format group box and then click COMP Sync.
If the software fails to automatically detect the signal -
•
If the software loses the external sync signal or does not detect it
automatically, click the signal detect button to force detection of the sync signal.
•
For composite signals, if the software is unable to automatically detect the correct
signal type–either bi-level or tri-level– click the Genlock/Framelock format list box
arrow and then click the COMP option corresponding to your sync source.