Nvidia NFORCE 650I - Manual (Page 16)

Mainboard nForce 650i Ultra
12
Front Panel Headers: FRONTPNL
FRONTPNL
Pin Assignment Function Pin Assignment Function
1 HD_PWR (+) 2 HDR_BLNK_GRN
3 HAD#
Hard Disk LED
(HD_LED) 4 HDR_BLNK_YEL
Front Panel Light
(PWRLED)
5 GND 6 SWITCH_ON#
7 FP_RESET#
Reset Switch
(RESET) 8 GND
Power Switch
(PWRSW)
9 N/C 10 Key
Hard Disk LED Header (Orange) : HD_LED
If your case front panel has a hard drive LED cable, attach it to this header. The LED will
flicker when there is hard disk drive activity.
Reset Switch Header (Blue) : RESET
This header can be attached to a momentary SPST switch (reset button) cable on your case
front panel. The switch is normally left open. When the switch closed, it will cause the
mainboard to reset and run the POST (Power-On Self Test).
Power LED Header (Green) : PWRLED
These mainboards provide a 2-pin power LED header. If there is a 2-pin power LED cord on
your case front panel, you can attach it to the 2-pin power LED header. Then the power LED
will illuminate while the system is powered on.
Power Switch Header (Red) : PWRSW
This header can be attached to a power switch cable on your case front panel. You can turn
your system on or off by pressing the button attached to this power switch cable.