Northern Industrial Tools 150611 - Manual (Page 9)

9
NOTE: For additional information regarding the parts listed in the following pages, refer
to the
Assembly Diagram on page 13.
1. WARNING! Always make sure the Rocker Switch (39) of the Impact
Wrench is in its “OFF” position and the tool is unplugged from its electrical outlet
prior to making any adjustments to the tool. (See Figure D.) Note: When your
finger is off the Rocker Switch (39), the tool is in the “OFF” position.
2. Rocker Switch (39): The Rocker Switch is operated manually simply by squeezing
the Switch to turn on the Impact Wrench and releasing pressure on the Switch to
turn off the Impact Wrench. The Rocker Switch features a forward/reverse mechanism
which allows you to change the rotational direction of the Impact Wrench. For
a
clockwise rotation, squeeze the lower portion of the Rocker Switch. For a
counterclockwise rotation, squeeze the upper portion of the Rocker Switch. To
avoid damage to the Impact Wrench, always wait until the tool completely stops
before changing rotational directions.
(See Figure D.)
3. 3/4" Impact Head (10): The 3/4" Impact Head features a spring and ball clip
to securely hold a socket. The Impact Head accepts all sizes of standard and
metric sockets having a 3/4" drive.
(See Figure D.)
PRODUCT FEATURES
IMPACT HEAD
(10)
ROCKER SWITCH
(39)
FORWARD (CLOCKWISE)
REVERSE (COUNTERCLOCKWISE)
FIGURE D
POWER CORD
(46)