Network Technologies T15-RS16 - Manual (Page 4)

4
OPERATION
The ENVIROMUX-ACVD-xxx is designed to close the circuit between the “
+
“ and “ “ terminals when AC voltage is greater
than 70VDC. If the voltage drops below 35VAC, the circuit will open. The “PWR” LED on ENVIROMUX-ACVD-xxx will illuminate
when the circuit is closed.
The circuit status can be monitored by either the ENVIROMUX-SEMS-16 or the ENVIROMUX-MINI. Each ENVIROMUX can be
configured to send alert notifications when the circuit opens or closes. Configuration of the ENVIROMUX-ACVD-xxx is done on
the “Digital Input Configuration” page of the ENVIROMUX-SEMS-16 web interface and the “Dry Contact Sensor Configuration”
page of the ENVIROMUX-MINI web interface. A sample configuration page from the web interface for each product is shown
below.
Please refer to the appropriate section of the ENVIROMUX manual for additional information on the configuration pages. (See
ENVIROMUX-SEMS-16 manual pages 27-31 “External Sensor Configuration” and “Contact Sensors”, or ENVIROMUX-MINI
manual pages 17-18 “Sensor Management”. )
Configuration page for ENVIROMUX-SEMS-16
(using RJ45 Sensor Inputs)
Configuration page for ENVIROMUX-SEMS-16
(using Digital Inputs) Configuration page for ENVIROMUX-MINI