Nokia M1122 - Manual (Page 41)

M1122 Administrator Manual
E Copyright Nokia Networks Oy C33906001SE_00 5-6
Default gateway for an interface that requires static next hop:
M1122(conf-common)# ip route 0.0.0.0 0.0.0.0 1.2.3.1
vcc1
Static route for an interface that learns the next hop automatically:
M1122(conf-common)# ip route 131.132.133.0
255.255.255.0 0.0.0.0 vcc1
Static route for an interface that requires a static next hop:
M1122(conf-common)# ip route 131.132.133.0
255.255.255.0 1.3.5.1 vcc1
M1122 can have only one default gateway. The interfaces that can
learn gateway/peer address dynamically can use value 0.0.0.0 instead
of the next hop address.
5.2.3 File system and downloading new firmware using TFTP
M1122 has a flash file system. Some files in the file system have
special meanings. These files are:
D image.exe; primary application file.
D image.bak; secondary application file used if image.exe has been
corrupted or is missing. It is then renamed as image.exe
automatically.
D startup.cfg; primary configuration file used during startup.
D dhcp.leases; contains DHCP lease table information.
M1122 has the following commands that can be used for file handling:
D copy
D rename
D delete
D dir
If you use image.exe as a destination filename with the copy command
and the image.exe already exists, the existing image.exe will be
automatically renamed as image.bak. This guarantees that the
application file exists if M1122 loses power during SW download.
You can update the operating software of M1122 by downloading the
new software from a TFTP server. To download and activate new
M1122 operating software: