Nokia M1122 User Manual
Page 44
E
Copyright Nokia Networks Oy
C33906001SE_00
5-9
Note
Before using your web browser for configuration, you must know the
IP address or the name assigned to your M1122.
There are three ways to find out whether to use a name or an IP
address:
D
Your service provider has given you an IP address for M1122.
D
Your M1122 uses Dynamic Host Configuration Protocol (DHCP)
and Domain Name Server. In this case the name is M1122.
D
Your M1122 uses DHCP. In this case run winipcfg.exe (Windows
95) or ipconfig.exe (Windows NT). The IP address of M1122 is the
Default Gateway address shown by the ipconfig program.
5.3.1
Opening a connection
To open a connection to the Nokia M1122:
1. Start your web browser.
2. Enter the name (’M1122’) or IP address of your Nokia M1122 in
the browser’s Open Location field and press Enter. If you use the
IP address, it has to be assigned to a local port or gateway interface
(VBRIDGE).
3. Type in the username/password as requested. If no
username/password is required, just click OK to proceed. The
Nokia M1122 Main Page appears.