NAD T975 User Manual

Page 10

Advertising
background image

10

ENGLISH

FRANÇAIS

DEUTSCH

ESP

AÑOL

IT
ALIANO

POR

TUGUÊS

SVENSKA

PROBLEM

NO SOUND

NO SOUND ON ONE CHANNEL

NO SOUND ON SURROUND CHANNELS

NO SOUND ON CENTER CHANNEL

WEAK BASS/ DIFFUSE STEREO IMAGE

TEMPORARILY SWITCHES TO STANDBY, THEN
SWITCHES BACK ON AUTOMATICALLY

CAUSE

Power AC lead unplugged or power not
switched on

Speaker not properly connected or damaged.

Input lead disconnected or damaged

No surround mode selected

Mono sound source

Speakers not properly connected

Surround volume level too low

Speaker not connected properly

Center volume level set too low

Speakers wired out of phase

Amplifier is running too hot

SOLUTION

Check if AC lead is plugged in and power
switched on

Check connections and speakers

Check leads and connections

Select a Surround Mode

Test system with Stereo or Dolby Surround
material

Check speakers and connections

Increase surround volume level

Check speaker and connection

Increase center volume level

Check connections to all speakers in the system

Let the amplifier cool down

Remove the excessive load condition

Speakers must be greater than 4 Ohms nominal

TROUBLESHOOTING

SPECIFICATIONS

AMPLIFIER SECTION
CONTINUOUS AVERAGE POWER OUTPUT

> 7 x 140 W (21.5 dBW)

INTO 8 OHMS OR 4 OHMS

(Minimum power per channel, 20 Hz - 20 kHz, all seven channels driven, with no more than rated distortion)

Rated Distortion

< 0.03%

(THD 20 Hz - 20 kHz)
Clipping power

> 170 W (22.3 dBW)

(Maximum continuous power per channel, all seven channels driven)

IHF DYNAMIC POWER
(Maximum short term power per channel)
8 ohms:

> 230 W (24 dBW)

4 ohms:

> 390 W (26 dBW)

2 ohms:

> 450 W (26.5 dBW)

Damping factor

> 300

(Reference 8 ohms at 50Hz)
Input sensitivity (for rated output into 8 ohms)

1.1V

Voltage gain

29 dB

Frequency response 20 Hz - 20 kHz

±0.2 dB
- 3dB at 3 Hz and 100 kHz

Signal / Noise ratio, A-weighted

> 96 dB ref. 1 W
> 125 dB ref. 140W

DIMENSIONS AND WEIGHTS
Net Weight

68 Ib (31kg)

Shipping Weight

72 Ib (33kg)

Dimension (W H D)

Net

17.1 x 7.1 x 17.7”(435 x 180 x 450mm)

Gross*

17.1 x 7.7 x 19.5”(435 x 195 x 495mm)

*Gross dimensions include feet, volume knob, power button and extended speaker terminals.

Specifications are subject to change without notice. For updated documentation and features please log onto

www.nadelectronics.com for the latest information about your T975.

T975 Aug2006.qxd 8/21/2006 11:15 AM Page 10

Advertising