Raymarine 320 - Manual (Page 93)

4-8 Raychart 320 Chartplotter
NMEA Input
Select the NMEA input setting as appropriate. This can be set to either
NMEA or RTCM. RTCM input is 4800 baud only.
Language
Select the language in which you wish information to be displayed. The
selected language will be used for screen text, labels, menus and options,
but will not affect the letters displayed by the context-sensitive cursor.
The language setting also affects the display format for lat/long position
information.
Simulator
The simulator allows you to operate your Chartplotter without data from
the antenna and/or external data sources. When the simulator is switched
on, a SIMULATOR data box is displayed during operation, showing that
simulation has been selected.
4.4 Chart Set Up Parameters
The CHART SET UP option allows you to set up the Chartplotter according
to your system configuration and your personal preferences.
The following table lists the Chart Set up parameters and their options,
shows the factory default setting and provides a space for you to make a
note of your new default setting. Each parameter is described in the
following subsections.
Table 4-2: Chart Set Up Parameters
Parameter Options
Factory
Default New
Default
CUSTOMISE CHART See below for
details
PLOTTER MODE OFF
ON OFF
CHART ORIENTATION NORTH UP
COURSE UP
HEAD UP NORTH UP
OBJECT INFORMATION OFF
ON ON
WAYPOINT SYMBOLS OFF
ON ON
81167_3.BOOK Page 8 Wednesday, November 21, 2001 2:12 PM