Rhino Mounts SE8A - Manual (Page 103)

ASSEMBLY
SE8A 01/11 Assembly Section 3-5
© 2011 Alamo Group Inc.
ASSEMBL
Y
HYDRAULIC OR MANUAL LIFT
Attach the Spring Assembly option (FIGURE Asm-R-0111) to the lug on the mower deck behind the Center
Gearbox. Retain using 1" x 2-3/4" bolt and locknut. Install the Hydraulic Cylinder (FIGURE Asm-R-0111) or
the manual Ratchet Lift Screw (FIGURE Asm-R-0112) between the Axle Center Lug and the Lug directly
behind the Center Gearbox. Use cylinder pin with cotter pin to secure.
WHEELS
Note direction of travel and curvature of rubber segments in tire and install as shown.