Rhino Mounts SE8A - Manual (Page 106)

ASSEMBLY
SE8A 01/11 Assembly Section 3-8
© 2011 Alamo Group Inc.
ASSEMBL
Y
DRIVELINES ATTACHMENT
Before starting assembly, make certain that all paint, dirt, and grease are removed from gearbox shaft (1). To
ease assembly apply a light coat of grease to splines and assemble. Do not assemble a driveline without a
shield.
Attach the slip clutch end of the driveline to the gearbox input shaft securely. Make certain that the slip clutch is
fully onto the input shaft splines. Tighten the locknuts (2) alternately until they have reached the proper torque.
Refer to Torque Chart in Maintenance Section.