Vitek VT-5009 SR - Manual (Page 8)

• Further, press MIRROR button of the remote to change the picture mirror mode directly.
Screen Up and Down Function:
• The position is selected on screen, press the [V+] or [V ] button to change picture display up to down side and
pressed the button back to normal mode.
VIEW MODE Function:
• The position is selected on screen, press the [V+] or [V ] button to change the screen view mode: Normal, 16:9,
Zoom or 4:3 of display format.
• Further, press VIEW MODE button of the remote handset to change the view mode of screen directly.
(4) Video and Audio System Setting:
• Press the [MENU] button four times continuously, then the
screen will show the System menu.
• Press the [CH+] or [CH ] button to select your desired setting
item position.
• Press the [V+] or [V ] button to change the setting functions and
shown on the screen:
C. SYS. Setting ( Colour System Setting):
The C. SYS setting position is selected on screen, press the [V+] or
[V ] button to select your local colour system. The colour system
would be set as following: AUTO, PAL (P4.43), P3.58, N3.58, N4.43,
SECAM. The unit original colour system is set to AUTO system.
S. SYS. Setting (Sound System Setting):
• The S. SYS setting position is selected on screen, press the [V+] or [V ] to select the TV sound system position. The TV
sound system can be set to M, B/G, I, D/K of TV audio system.
• Further, by pressing SYS button of the remote handset to change sound system directly.
SCREEN BLUE BACK Setting
The BLUE BACK position is selected on screen, press the [V+] or [V ] button to select the BLUE BACK to ON/OFF. If "ON" is
set and the screen will change to blue colour background automatically.
SWAP Program Channel function:
• The SWAP setting position is selected on screen which allows the current program channel to swap to your desired other
program channel.
• Press the [V+] or [V ] button to store your desired target program channel (it means the target channel has been selected
with the channel number will be changed to red colour automatically.). Then press the [CH ] button to confirm the swap
ping program channel and press the [V+] or [V ] to swap the program function.
COPY Function:
• The COPY setting position of screen function allows you to copy current channel number to your desired program channel
memory.
• Press the [V+] or [V ] to select up or down the program memory. Then press [CH ] to confirm channel number and press
[V+] or [V ] to copy the program function.
WEAK SIGNAL Function:
• Normally, the weak signal function has been set to ON. Even the weak signal function would be receiving in best sensitivity.
• In the case of high strength TV signal area, the weak signal should be set to OFF to improve the picture of screen.
In the WEAK SIGNAL setting position of screen, press the [V+] or [V ] to set function ON or OFF.
ENGLISH
8
5009.qxd 29.06.05 14:56 Page 8