Roberts Radio 205 - Manual (Page 62)

61
1
2
Finding new DAB radio stations
Should you wish to use your radio for DAB reception in a new location,
or if no stations were detected during the initial scan, you can follow this
procedure to allow your radio to find out which DAB radio stations are
available.
1. Ensure that the telescopic antenna is extended, and then press the
Mode button as needed to select DAB radio mode.
2. Once in DAB mode press the Menu button.
3. Rotate the Tuning/Select control until 'Full scan' is highlighted on the
display.
4. Press the Tuning/Select control to initiate the scan. The display will
show 'Scanning' and your radio will perform a scan of the Band III DAB
channels. As new stations are found the station counter will increase
and stations will be added to the list. The bar graph indicates the
progress of the scan.
3-4