Rosewill RC-400 User Manual
Page 4
Gigabit PCI Card RC400-LX User Manual
4
For Windows® Vista
In Windows® Vista, when the system is booted up it automatically
detects the Gigabit Ethernet PCI Card and install the Gigabit Ethernet
PCI Card with in-build drivers. Following is the procedures for upgrading
Gigabit Ethernet PCI Card driver under Windows® Vista operating
system.
1.
Please insert the CD driver bound with Gigabit Ethernet PCI Card into
your CD-ROM Drive.
2.
At the Windows desktop click Start, then Run.
3.
Type D:\ RC400-LX \setup.exe, then click OK. (Change D:\ to match
your CD-ROM drive letter)
4.
Follow the on-screen instructions to complete the instructions to
complete the installation to complete the installation.
5.
Restart Windows to complete the installation.
Verify Driver Installation
Click on the “Device Manager” tab in System Properties, which you
access from the Windows Control Panel. You should see a “Realtek
RTL8169/8110 Family Gigabit Ethernet NIC” (Windows®
2000/XP/Server 2003) or a “Realtek RTL8169/8110 Family PCI Gigabit
Ethernet NIC (NDIS 6.0)” (Windows® Vista) installed under “Network
adapters” item.
START > Control Panel > System > Device Manager