Runco DTV-992 - Manual (Page 54)

APX-3
Appendix 2
ON- SCREEN OPERATING INSTRUCTIONS
ACCESS TO EYE-Q TM ON-SCREEN MENUS
After the EYE-Q TM unit has been correctly installed in the pro-
jector, press the <ADJUST> button on the RCU (Remote
Control Unit) or the local keypad of the projector to enter the
‘Adjustment mode’
(please refer to the projector Owner’s Manual). The EYE-Q
TM
path will be displayed in the menu:
Highlight EYE-Q TM by pushing the or keys of the
control disc (on RCU).
Press the <ENTER> button to enter the EYE-Q TM menu.
EYE-Q TM MENU
The EYE-Q TM menu will be displayed after the path EYE-Q TM
is selected. Six items are available:
TOUCHUP.
AUTOCONVERGENCE.
QUICKAUTOPICTURE.
FULLAUTOPICTURE.
EYE-Q TM SETUP.
EYE-Q TM DIAGNOSTICS.
Choose EYE-Q TM SETUP first to carry out the SETUP proce-
dures.
Use EYE-Q TM DIAGNOSTICS to check whether the EYE-Q TM
is functioning normally.
ADJUSTMENT MODE
Select a path from below:
EYE-Q
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 1
Select with
then <ENTER>.
<EXIT> to return or
EYE-Q
TOUCH UP
AUTOCONVERGENCE
QUICK AUTOPICTURE
FULL AUTOPICTURE
EYE-Q SETUP
EYE-Q DIAGNOSTICS
Select with
then <ENTER>.
<EXIT> to return or