Roberts Radio R983 - Manual (Page 15)

If you need any further advice, please call our Technical Helpline on :-
0181 758 0338 (Mon-Fri)
Setting the HWS (Humane Wake System) alarm
A bleep tone will sound when using the HWS alarm. The alarm bleep will
increase in volume every 15 seconds for one minute followed by one
minutes silence before repeating the cycle. The HWS alarm will sound for
one hour unless turned off by pressing the Power button. Pressing the
Power button whilst the alarm is sounding will cancel the alarm for 24
hours.
1. The HWS alarm time can be set with the radio switched on or off.
2. Press and hold down the Alarm On/Off button until the hour digits and
alarm symbol flash in the display.
3. Repeatedly press the Alarm mode button until the display shows
ALARM .
4. Set the required hour using the Tuning up/down buttons.
5. Press the Time set button, the minute digits will flash in the display.
6. Set the required minute using the Tuning up/down buttons.
7. Press the Time set button to complete alarm setting.
8. To permanently cancel the alarm press and hold down the Alarm On/
Off button until the ALARM symbol is removed from the
display.
ALARM
A larm
O n / O ff
M o d e
/
ALARM
B a n d
Tim e
S e t
ALARM
ALARM
ALARM
B a n d
Tim e
S e t
ALARM
Manual/Auto Seek
Tuning
Manual/Auto Seek
Tuning
14