Roberts Radio R983 - Manual (Page 16)

1. Whilst the alarm is sounding pressing any button (except the Power
or Light button ) will activate the snooze function. The Radio or HWS
alarms will be silenced for 5 minutes.
2. The Display will flash both the snooze symbol
z
z
z
and the alarm
symbol . The snooze function can be repeated during
the 1 hour that the alarms are active.
Snooze function
ALARM
z z z
Sleep function
The sleep timer will automatically switch off the radio after a preset time has
elapsed.
1. Press and continue to hold down the button the display will cycle
through the available sleep times in the order 90-60-30-15-90. Release
the button when the required sleep time appears in the display.
The symbol will appear in the display and the radio will play the
last station selected.
2. To cancel the sleep function, press the Power button, the
symbol will disappear and the display will revert to showing real time.
FM
ALARM
MHz
Display backlight
When the radio is powered via the mains the display backlight will remain
illuminated unless turned off by pressing the Light button.
When your radio is powered by batteries pressing the Light button will turn
on the display backlight and illuminate the display for approximately 2
minutes. The display backlight may be turned off immediately by pressing
the Light button.
L i gh t
FM
ALARM
MHz
15