Radio Shack HTX-242 - Manual (Page 7)

7
Mounting the HTX-242 in a Vehicle
When you select a mounting location for the HTX-242, be sure:
• You can easily reach it
• No wires or cables will interfere with the vehicle’s operation
• It is not directly in front of heating vents
• All wires will reach their connection points
Use the supplied screws, metal washers, bracket, rubber washers,
and mounting knobs, as shown, to mount the transceiver.
Cautions:
• To avoid damaging your vehicle’s electronic systems, contact your
vehicle’s manufacturer before you install the HTX-242 to find out
about the proper transceiver mounting locations, antenna loca-
tions, and power and antenna cable routing guidelines.
• Do not apply power to the transceiver until after you properly
mount and connect an antenna.