Cable box setup, Setting up the vcr – RCA VR702HF User Manual

Page 11

Advertising
background image

9

Setting Up the VCR

Cable Box Setup

This setup applies only when all channels are received
through the cable box. There are two steps:

The first sets up the VCR for the output channel of the
cable box signal.

The second sets up the VCR for a remote-controllable
cable box so the VCR can control the cable box by
changing channels for timer or VCR Plus+ recordings.
Position the remote-controllable cable box above the
VCR as shown in the Connections section.

1. Press MENU to display the VCR MAIN MENU.

VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit

2. Press 4 to display the CHANNELS menu.

CHANNELS

1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Setup
5 Cable Box Setup

0 Exit

3. Press 5 to display the CABLE BOX SETUP menu. Then

select one of the three choices.

CABLE BOX SETUP

Do you use your cable
box to receive ALL
channels or only SOME
channels?

1 ALL channels
2 Only SOME channels
3 Cancel setup

4. If you selected ALL channels, enter the output channel

of your cable box, usually 03, 04, or video line input and
press MENU.

Cable Box Setup

ALL channels: enter two numbers for
output channel of your cable box or
press INPUT if you connect your cable
box with AUDIO/VIDEO jacks.

Only SOME channels: if you only use
the cable box to tune premium
channels.

Cancel setup: select to cancel.

Advertising