RCA VR702HF - Manual (Page 15)

13
Setting Up the VCR
Setting Daylight-Saving Time
1. Press MENU to display the VCR MAIN MENU.
2. Press 3 to display the TIME menu.
TIME
1 Set Time and Date
2 Auto Clock Set: ON
3 Set Time Zone
4 Set Daylight Savings
Time Data was found on
channel 20.
0 Exit
3. Press 4 to display the SET DAYLIGHT SAVINGS screen.
SET DAYLIGHT SAVINGS
Does your area observe
Daylight Savings Time
from April to October?
1 Yes, DST is observed
2 No
3>Automatic
Press MENU to continue
4. Select one of the options and then press MENU to
continue.
• DST stands for “Daylight Saving Time.”
• If you choose Automatic, the VCR sets the clock using
the DST information broadcast in the signal (channel).
If the Auto Clock Set was unsuccessful, set the clock
through the TIME menu. The Auto Clock Set feature is set
to OFF automatically when you set the clock this way.
1. Press MENU to display the VCR MAIN MENU.
2. Press 3 to display the TIME menu.
TIME
1 Set Time and Date
2 Auto Clock Set:
ON
3 Set Time Zone
4 Set Daylight Savings
Time Data was not found.
0 Exit
3. Press 1 to display the SET TIME AND DATE menu.
Spring forward, Fall back
In the Spring, daylight-saving time
begins on the first Sunday in April.
Because the clock automatically
changes from 2 a.m. to 3 a.m.
(forward one hour), including the
extra hour for timer recording within
this time frame is necessary.
In the Fall, Daylight-Saving time ends
on the last Sunday in October. The
VCR clock automatically changes
from 2 a.m. to 1 a.m. (back one hour).
Therefore, it can affect your
recording length.