Radio Shack 43-142 - Manual (Page 32)

The Basics

Resetting Handsets
If you want to register a handset to a different base or replace
a handset with another one, you must first reset the existing
registration data. To reset, please follow these steps:
Press the MENU soft key. Select the DEREGISTER HS
submenu.
DEREGISTER HS? appears. Move the cursor to select YES.
Press the OK soft key.
Or
From the handset, press and hold and # for more
than 5 seconds. You will hear a confirmation tone, and
DEREGISTRATION COMPLETE appears.
After resetting the handset, place the handset to the base to
register. You must re-register the handset before you can use it.
NOTE
If the handset cannot contact the base, it will
display OUT OF RANGE. If this happens, see
“
Appendix: Handset-Base Registration” on page
80. For instructions on registering the handset, see
page 31.
1.
2.