Radio Shack 43-142 - Manual (Page 52)

Beyond the Basics

Transferring a Call
You can transfer a call from one station to another.
During a call, press INT’COM/HOLD.
Use or to select the station you want to transfer the call
to, then press the OK soft key.
The call will automatically be placed on hold, and a paging
tone sounds. To cancel the transfer, press /FLASH or on
the initiating handset or on the base.
When another station accepts the transferred call, your call
will be disconnected. If you want to rejoin the call, press
/FLASH or on the handset or on the base.
Answering a Transferred Call
When a station receives a call transfer, it sounds a paging tone
and shows the ID of the station that is paging. To accept the call
transfer:
Press /FLASH, INT’COM/HOLD, or the ANSWER soft key
from the handset (or INT’COM/HOLD, or the ANSWER soft
key on the base).
To speak to the caller, press /FLASH on the receiving handset
or on the base.
If you have multiple handsets, only the first handset to answer
the transfer page will be connected to the call.
If the transfer page is not picked up within one minute, the
operation will be canceled.
1.
2.
3.
1.
2.